IBM Power System S821LC Installing page 90

Figure 43. PCIe3 1.6 TB NVMe Flash Adapter
Important: The micro USB connector visible through the adapter tailstock has no function and cannot be
used. Do not insert a cable of any kind into this port.
Specifications
Item Description
Adapter FRU number
HDS-AVM-HUSPR3216AHP301 (Designed to comply with RoHS requirement)
I/O bus architecture
PCIe3 x4
Slot requirement
For details about slot priorities and placement rules, see PCIe adapter placement rules and slot
priorities (http://www.ibm.com/support/knowledgecenter/POWER8/p8eab/
p8eab_mtm_pciplacement.htm) and select the system you are working on.
Supported Systems
®
POWER8 processor-based systems
v 8001-12C and 8001-22C
Voltage
12 V
Form factor
Short, low-profile
Maximum number
For details about the maximum number of adapters that are supported, see PCIe adapter
placement rules and slot priorities (http://www.ibm.com/support/knowledgecenter/POWER8/
p8eab/p8eab_mtm_pciplacement.htm) and select the system you are working on.
Attributes provided
1.6 TB of low latency flash memory
Non-Volatile write buffer
74
Power Systems: Installing the IBM Power System S821LC (8001-12C)