Panasonic MGSDB2 Instruction Manual page 5

Safety Precautions
Perform installation by taking into
consideration the mass of the
body and rated output of the
product.
Adjust ambient environmental
condition of motor and speed
controller to match the motor
operating temperature and
humidity.
Exactly follow the installing
method and direction specified.
Use the speed controller in
combination with the specified
motor.
Connect the motor
electromagnetic brake control
relay in series with a ground-fault
interrupter, circuit breaker and
relay so that they turn off the
circuit upon emergency stop.
Test-run the securely fixed motor
without loading to verify normal
operation, and then connect it to
the mechanical system.
Level of input voltage to the
speed controller should
correspond to the motor rated
voltage.
Provide protection device against
idling of electro-magnetic brake
or gear head, or grease leakage
from gear head.
Please observe safety precautions fully.
Failure to heed these
instructions will result
in personal injury or
malfunction.
Failure to heed this
instruction will result
in fire.
Lack of connection
will cause
malfunction.
Operation using a
wrong model or
wrong wiring
connection will result
in personal injury.
Operation from a
voltage outside the
rated voltage will
cause electric shock,
personal injury or fire.
Lack of protection
will cause personal
injury, damage,
pollution or fire.
– 8 –
Don't place any obstacle object
around the motor and peripheral,
which blocks air passage.
Correctly run and arrange wiring.
Maintenance must be performed
by an experienced personnel.
Always keep power disconnected
when the power is not necessary
for a long time.
Scraps must be treated as
industrial waste.
– 9 –
Temperature rise will
cause burn injury or
fire.
Wrong wiring will
cause personal injury
or electric shock.
Improper operation
will cause personal
injury.