Woods ALITEC PS9 1.5MD Operator's Manual page 13

Clean up any stuck picks and lubricate with suit-
●
able lubrication like diesel fuel.
● Replace any safety decals that are missing or not
readable.
Periodically or Before Extended Storage
Clean large debris such as clumps of dirt, grass,
●
crop residue, etc. from machine.
Remove the remainder using a low-pressure water
●
spray.
1. Be careful when spraying near scratched or torn
safety decals or near edges of decals as water
spray can peel decal off surface.
2. Be careful when spraying near chipped or
scratched paint as water spray can lift paint.
3. If a pressure washer is used, follow the advice
of the pressure washer manufacturer.
● Inspect machine and replace worn or damaged
parts.
Sand down scratches and the edges of areas of
●
missing paint and coat with Woods spray paint of
matching color (purchase from your Woods
dealer).
● Replace any safety decals that are missing or not
readable (supplied free by your Woods dealer).
See Safety Decals section for location drawing.
STORAGE
NOTICE
The pavement saw is shipped with hoses.
■
Unconnected hose ends should either be capped
or have quick disconnect fittings installed to pre-
vent loss of fluids or contamination.
Keep children and bystanders away from stor-
■
age area.
MPS9 (Rev. 4/20/2007)
NOTES
Operation 13