Table of Contents
Advertisement
ABB i-bus
®
KNX
2
Technical data
and connection
Technical data and connection
The device-specific functions are explained more detail in the following
sections.
The DALI Gateway is a DIN rail mounted device for insertion in the distribu-
tion board. It is used for controlling DALI equipment e.g. ballasts, transfor-
mers, relays etc. via the KNX.
Up to 128 DALI devices (max. 16 per output) can be connected to 8 inde-
pendent DALI outputs (channels).
The DALI Gateway has a test button which enables the DALI outputs to be
manually switched in sequence in a test mode without bus voltage connec-
ted.
The DALI-Gateway DG/S 8.1 has an AC or DC mains supply. The connection
to the ABB i-bus
®
in the device is established via the bus connection
terminal.
The DALI Gateway is parameterised with the application program
Dim Slave Lightscenes Dynamic 8f/1.1 and the ETS software.
11
Advertisement
Table of Contents
