Table of Contents
Advertisement
ABB i-bus
®
KNX
4.3
Description
of the parameters
Project design and programming
The parameters and parameter windows for the operation and programming
of the application "Dim Slave Lightscenes Dynamic 8f" are described
in more detail in the following section.
The number of parameter windows can vary depending on the parameter
setting.
When the application software "Dim Slave Lightscenes Dynamic 8f" is
configured for the first time, the parameter options are preprogrammed with
a specific basic setting (default settings). The default settings are highlighted
in the following diagrams.
The first parameter window that is shown when the "Edit Parameter" dialog
is retrieved appears as follows:
Fig. 16: First parameter window when "Edit Parameters" dialog is retrieved (default setting)
33
Advertisement
Table of Contents
