[Figure 5-30: Connection Of System For Oating Solar Array, Load And Grid]; [Figure 5-31: Pv Connector Connection (Mc4 Connector Connection)] - Hansol Scalable All In One Series Installation Manual

[Figure 5-30: Connection of system for oating solar array, load and grid]

The Male product is connected to the lead wire coming from the distribution box in the PV
side, and the Female part is attached to the All in One system. The two products are properly
docked when connected together.
CAUTION
Damaged products must neither be installed nor put into operation.
Pay attention especially to awless seals.
The connectors are not for current interrupting.
Never connect or disconnect under load!

[Figure 5-31: PV connector connection (MC4 connector connection)]

5. Electrical Connections
47