Position (Location Selection); [Figure 4-2: Minimum Clearance For All In One]; [Figure 4-3: Restriction For The Surface Gradient] - Hansol Scalable All In One Series Installation Manual

4. Installation

[Figure 4-2: Minimum Clearance for All in One]

4.1.6 Position (Location Selection)

As shown in the [Figure 4-3], install the device on a at surface. (Front, back, left, right
gradient within ±0.5°)
To allow for natural ventilation, the side of the system must be kept away from the wall
about 0.3m at least. Make sure not to have foreign substances and objects stuck in the
blowing fan, ventilation entrance and exit sides.

[Figure 4-3: Restriction for the surface gradient]

19