Safety; Intended Use; [Figure 2-1: Connection Diagram] - Hansol Scalable All In One Series Installation Manual

2. Safety

2.1 Intended Use

The Scalable All in One system is designed for residential use. It is a single-phase, grid-
connected system of solar energy sources and Li-Ion Battery energy storage.
The Scalable All in One system uses solar energy power connected to the input/output
terminal installed on the side of the device in order to:
1) charge the Li-Ion battery energy storage,
2) provide a supply to the household load, and
3) convert direct current (DC) electricity of the battery to alternating current (AC) to
discharge as household single-phase load or electric system.
This device should not be used for any purpose other than the purpose described in this
installation manual. Any substitute use of this device, random change in any of its parts, and
use of components other than sold or recommended by Hansol Technics will nullify the
product's guarantee. For example, Hansol Li-Ion battery energy storage should not be
replaced by other manufacturer's battery storages. For further information on proper use of
this device, contact the Hansol Technics Service line or visit at"www.hansoltechnics.com"
NOTICE
The Scalable All in One system is intended for residential use only.
The Scalable All in One system should not be used for commercial or
building.

[Figure 2-1: Connection Diagram]

2. Safety
4