Enabling/Disabling The Vlan Filtering Function On An Ethernet Port; Copying Port Configurations To Other Ports - H3C S9500 Series Operation Manual

Operation Manual – Ethernet Port
H3C S9500 Series Routing Switches
Enable the port VLAN VPN feature
Disable the port VLAN VPN feature
Note that if GVRP, STP, or 802.1x has been enabled on the port, you will be unable to
enable the VLAN VPN feature.
By default, the port VLAN VPN feature is disabled.

1.2.16 Enabling/Disabling the VLAN Filtering Function on an Ethernet Port

Perform the following configuration in Ethernet port view.
Enable the VLAN filtering function
Disable the VLAN filtering function
By default, the VLAN filtering function is enabled on Ethernet ports.
With the VLAN filtering function enabled, the port permits only the packets of the VLAN
where it resides. With the VLAN filtering function disabled, the port forwards all the
packets it received.

1.2.17 Copying Port Configurations to Other Ports

To keep the configurations of some ports consistent with a specified port, you can use
the copy configuration command to copy the configurations of that specified port to
the other ports. Such configurations may involve STP, QoS, LACP, and port settings as
follows:
To do ...
To do ...
1-11
Chapter 1 Ethernet Port Configuration
Use the command ...
vlan-vpn enable
undo vlan-vpn
Use the command ...
vlan filter enable
vlan filter disable