Selecting A Preset Transmission Mode - TVU networks TVU One Hardware User's Manual

8 | TVU One Hardware User Guide
5. When prompted, touch the LCD screen and slide the toggle
to the right to start the Live transmission.
To Exit from going Live, touch the X in the top right corner of the
screen to close the window.
6. To stop a Live transmission, tap the center of the LCD screen.
A "Stop Live" option will display at the bottom of the screen.
Slide the toggle from left to the right to stop the Live trans-
mission.
Slide to go live
Starting the Live transmission
To stop a live transmission, simply tap the middle of the touch
screen and a pop-up screen will appear. A "Stop Live" toggle will
appear at the bottom of the page. Slide the toggle from left to
right to stop the live transmission
TVU One Hardware User Guide
Document part number: TVUOne UG Rev A EN 04-2019
Slide to Stop Live
Stop the Live transmission

Selecting a preset transmission mode

To select a preset transmission mode, complete the following
steps:
1. Touch the center of the LCD screen and slide your finger
down. The Mode window displays.
2. Tap to select one of the following options:
Your selection will highlight green
Interview: Bitrate 2048, delay 2 seconds
•
Normal: Bitrate 5120 delay 4 seconds
•
Fast Moving: Bitrate 5120, delay 8 seconds
•
SD: Bitrate 2048, delay 4 seconds
•
Tapefeed: Bitrate 10240, delay 10 seconds. This mode is
•
optimized for content with multiple scene changes
Custom: A custom transmission mode set by the receiver
•
TVU Networks® Corporation, © Copyright 2019