Federal Communications Commission (FCC) Regulation of TVU®, TVU Networks®, TVU networks®, and TVUPack®, TVU Grid®, TVU One®, TVU Era®, TVU CAS™, TVU Me™, TVU Anywhere™, TVU Electronic News Gathering (ENG) Mobile Systems MLink™, TVU RPS™, TVU Dashboard™, TVU MediaMind™, and The FCC provides specific policies and procedures related to TVU Sports™...
TVU One Hardware User Guide | 1 Introduction, setup, and base operation This User Guide provides a product overview, setup, and base operation information for the TVU One transmitter. Product overview Fully Compatible with TVU Grid – TVU’s IP based video •...
• the use of a different AC plug. Please contact either a local Before you begin setting up the TVU One transmitter, it is recom- or foreign TVU Networks authorized service center for mended that you identify the devices you intend to use with the assistance in selecting an alternate AC plug.
(ah). To learn more about lithium bat- teries, their restrictions, and how to tell what size they are, go to This device is designed to be used only with TVU Networks http://SafeTravel.dot.gov. supplied batteries. Use only TVU Networks supplied devices and chargers to charge the supplied batteries.
• External modems • TVU transmitter controls and operations TVU transmitter is the central component of the TVU One sys- tem. The transmitter handles video capturing, video encoding DC Input and transmission, modem management and dialing, and status/ SDI IN...
LAN connection. 2. To remove a SIM card, simple push the SIM card in until it 4. To preview the TVU One screen on a monitor, connect the clicks, and it will pop back out. standard HDMI cable to the HDMI Out port or connect a monitor cable to the DP display port.
| TVU One Hardware User Guide G-type battery configuration examples: There are four transmitter carrying bag configurations for exter- nal batteries, they are as follows: V-type battery configurations: TM1000 v1 V-type battery with a black connector • TM1000 v2 V-type battery with a green connector •...
TVUPack. If the LCD screen displays “LIVE”, it indicates the transmission is Live. If a camera or input source is not connected to the TVU One transmitter, the LCD display panel will display “Online” (Standby) or Preview mode.
| TVU One Hardware User Guide 5. When prompted, touch the LCD screen and slide the toggle to the right to start the Live transmission. To Exit from going Live, touch the X in the top right corner of the screen to close the window.
TVU One Hardware User Guide | 3. To save your selection, Click OK. 4. To exit from the menu, click the X in the top right corner of the screen. Latency management To manage the second and sub-second Latency settings, com- plete the following steps: ...
Page 14
10 | TVU One Hardware User Guide TVU One transmitter information To access the TVU One model number, PeerID, software version, app version input, format, and transmitter configuration infor- mation, complete the following steps: 1. Touch the top of the LCD screen and slide your finger down.
Page 15
TVU One Hardware User Guide | Product specifications This section provides product specifications for the TVU One model TM1000 v1and TM1000 v2 transmitters. Product specifications Specification TVU One transmitter Video Input formats HD/SD-SDI (BNC) input -1080i 59.94/50, 720p-59.94/50 480i-59.94, 576-50.
Need help?
Do you have a question about the TVU One and is the answer not in the manual?
Questions and answers