Chengdu Ebyte Electronic Technology Co,;Ltd
2. The data transceiver cannot receive data which is more than the buffer capacity;
6. Operating mode
E62-DTU(433D30) has two operating modes, if low power consumption is not required, transmission mode (mode 0)is
recommended for transmission.
The factory default is transmission mode (mode 0).
Mode 0
Mode 1
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019,
Categories
Transmission mode
Configuration mode
M1
M0
ON
ON
ON
OFF
E62-DTU (433D30)user manual
Description
Serial port open, wireless open, transparent transmission,
full duplex operation
Serial port at fixed 9600bps baud rate, wireless off,
configurable parameters
10