Alarm Settings; Scan / Barcode - Omega TCL-3M165E2 Series User Manual

Operation
Set gradient:
 Tap on the parameter field "gradient", input the new values and confirm the input.
 The new value is adopted and you will be returned to the previous window.
Behavior at test end / Safety temperature value
Using the parameter fields of the new window, you can set the safety temperature value and
define the behavior at test end.
The parameter field "Safety range value" is only visible if "Safety temperature value" was
selected as the behavior at test end.
Behavior at test end:
 Tap on the parameter field "Behavior at test end".
 The "Select behavior at test end" window is displayed.
 Select the desired behavior and confirm the input.
 The new behavior is adopted and you will be
returned to the previous window.
Safety temperature value:
 Tap on the parameter field "Safety temperature
value".
 Input the respective safety temperature value and
confirm the input.
 The new value is adopted and you will be returned to the previous window.
5.6.6

Alarm settings

Here, you can define at what times the calibrator activates the alarm signal.
Details on the selectable times are displayed in the
information box.
 Select the desired times by tapping on
selection list.
 Confirm your selection with the
 The new times are adopted and you will be
returned to the previous window.
5.6.7

Scan / Barcode

Via the parameter field of the configuration range, an input window is opened with a virtual
keyboard. A connected USB barcode reader can replace the keyboard input here.
When scanning a barcode, all the test tasks and test specimens are searched for the code.
All the entries linked to the barcode are displayed in a selection list.
By using the parameter field of the test tasks, a scanned barcode can be linked to the test
task.
- 40 -
in the
icon.
Series TCL-3M165E2