Sangean DDR-7 Manual page 23

Listening to music via Bluetooth
streaming
Reconnecting a previously-paired Bluetooth
source device
The DDR-7 can memorize up to 8 sets of paired Bluetooth source devices,
when the memory exceed this amount, the earliest paring device will be
over written from the device.
If your Bluetooth source device already paired with the DDR-7 previously,
the unit will memorize your Bluetooth source device and it attempts
to reconnect with a Bluetooth source device in memory which is last
connected. If the last connected Bluetooth source device is not available,
the DDR-7 will try to connect to the second last Bluetooth source device.
Disconnecting your Bluetooth device
1.
Press and hold the Menu button to enter the Bluetooth menu.
2.
Rotate Tuning control knob to select "Cancel Pairing". Then press
the Select button.
3.
To disconnect with your Bluetooth device, rotate Tuning control
knob to select "Yes" and then press the Select button. There will be
a confirmation tone sound and the Bluetooth LED indicator on the
radio will flash a fast blue to show the radio is discoverable again for
pairing. Choosing "No" or "Back" will go back to the previous menu
display. Press the Select button to confirm your choice.
4.
Alternatively, you can press the Mode button to select any mode
other than Bluetooth mode or turn off Bluetooth on your Bluetooth
device to disable the connection.
022