Emerson Rosemount 248 Quick Start Manual page 10

Quick Start Guide
Figure 6. Rosemount 248 Wireless shown on AMS Wireless Configurator
3.5 Troubleshooting
If the device is not joining to the network, check to make sure that you have a
power supply in your device. If the device is not joined to the network after power
up, verify the correct configuration of the Network ID and Join Key, and verify that
Active Advertising has been enabled on the Gateway. The Network ID and Join
Key in the device must match the Network ID and Join Key of the Gateway.
The Network ID and Join Key may be obtained from the Gateway on the
Setup>Network>Settings page on the web server (see
Network ID and Join Key may be changed in the wireless device by using the
following Fast Key sequence.
Table 2. Fast Key Sequence
Function
Join to Network
10
Fast Key sequence
2, 1, 1
Figure 5 on page 9). The
April 2019