Printing From Other Application Software - Sony DPP-FP50 Fall 2005 Operating Instructions Manual

Printing from other
application software
You can use a commercially-available
application software to print an image
from the DPP-FP50. Select "DPP-FP50" in
the print dialog box and select the print
paper size in the page setup dialog box.
For details in print settings, see steps 8 and
9 on pages 66 and 68.
On "Borderless" setting in the "Paper
size" section
When using an application other than the
PictureGear Studio, an image might be
printed with borders even if you select
borderless print in the "Paper size" section
of the "Paper/Output" tab in the "Sony
DPP-FP50 Properties" dialog box.
When you select the borderless print
option, the printing rage information for
borderless print will be supplied to the
application. Some applications, however,
may arrange and print the image with
borders within the specified range.
If this occurs, do either of the following to
print an image without borders:
• When you can set print range with an
application, set an image to be printed
fully in the print range. For example,
select "Full page photo print" or a
similar option.
• Set a larger value in the "Enlarge/
Reduce" text box in the "Paper/Output"
tab of the "Sony DPP-FP50 Properties"
dialog box.
If borders remain on the right and
bottom sides of a printed image even
after you set a larger value, check
"Upper left reference".
In either case, make sure to display and
check the preview image before printing.
GB
70
Orientation setting
Depending on the application software
you use, orientation may not change even
if you change portrait or landscape setting.
With border/borderless setting of the
printer driver
When the application software you use
has border/borderless setting, we suggest
you select borderless as the printer driver
setting.
Print quantity setting in the Properties
dialog box
Depending on the application software
you use, the print quantity setting of the
application you use may have priority
over the setting specified in the printer
driver dialog box.
Exif Print Settings in the "Graphics" tab
The Exif Print setting in the "Color
reproduction/Picture quality" section
supports the PictureGear Studio only. If
you use other application to print an
image with this option checked, the image
may be printed with incorrect colors. If
this occurs, remove the check.