Printing From A Software Application - Sony DPP-SV88 Operating Instructions Manual

Note
The reader software does not operate the DPP-SV88 as a completely removable medium.
When using the software, note the following restrictions:
• Before editing an image from the "Memory Stick" or PC card inserted in the printer,
store it on the computer's hard disk.
If you double-click and open the file in the printer with its associated application and
edit it with the application, you cannot save the edition on the "Memory Stick" or PC
card with the application's saving command.
• You cannot view or open the file in the printer using the "Open" command of an
application other than the reader software.
• You cannot run an execution file contained in the "Memory Stick" or PC card.

Printing from a software application

You can use the "Print "command of a software application to print an image
from your computer's hard disk with the DPP-SV88 Digital Photo Printer.
Notes
• This sections explains the settings and operations with a typical application as an
example. Depending on the application, print settings and operations may differ. For
the details, refer to the manual of your application.
• To get the print you expect, we suggest you use application software that allows you
to check the print preview. Otherwise, make the image size 1664 (dots) x 2466 (dots)
and the resolution 403 dpi.
1
Start the application software that you use to print with, and
select the image to be printed.
2
Click "Print Setup" from the "File" menu of the application.
The "Print Setup" dialog box appears.
3
Set the printer.
The dialog box differs depending on the application.
Continued
GB
79