Sony DPP-FP50 Fall 2005 Operating Instructions Manual page 85

Check
Symptom
• Is "Exif Print"
Colors are not
reproduced
correctly.
• Is "ICM" selected in
Preview image
does not reflect the
print settings in
the "Graphics" tab
of the "Sony DPP-
FP50 Properties"
dialog box.
• Are you using
Print quantity
specified in the
"Paper/Output"
tab of the "Sony
DPP-FP50
Properties" dialog
box does not take
effect.
checked in the
"Graphics" tab of the
"Sony DPP-FP50
Properties" dialog
box?
the "Graphics" tab of
the "Sony DPP-FP50
Properties" dialog
box?
PictureGear Studio?
Cause/Solutions
c The Exif Print setting in the "Color
reproduction/Picture quality" section
supports the PictureGear Studio only. To
print from other application, uncheck
"Exif Print".
c The ICM setting may be valid only when
you are using an ICM-compliant
application. Check to see if the application
software you are using supports ICM.
c The print settings adjusts the printer itself
and cannot influence the preview image.
c Set the print quantity in the "Print" dialog
box of the PictureGear Studio. The print
quantity setting in the "Paper/Output"
tab of the printer driver does not take
effect.
c Depending on the application you use,
the print quantity setting of the
application you use may have priority
over the setting specified in the printer
driver dialog box.
85 GB