Sony DPP-FP50 Fall 2005 Operating Instructions Manual page 37

Registering commonly-used
characters as a message
You can register commonly-used
characters as a message and can load them
later onto the character input box. Up to
three messages, each message with the
maximum of 80 characters, can be
registered.
1
Follow steps 1 through 5 in
"Superimposing characters"
(pages 35 and 36) to enter
characters that you want to
register as a message in the input
box.
2
Press g/G/f/F to select "LOAD/
SAVE" and press ENTER.
The dialog box to register and save
messages is displayed.
3
Press g/G to select "Save" and
then press ENTER.
The message selection screen is
displayed.
4
Press f/F to select the message
box that you want to save the
characters in and press ENTER.
The input characters are registered as
a message.
To load a registered message
In step 3 above, select "Load" to display
the window used for selecting a message.
Press f/F to select the desired message
and press ENTER. The selected message is
placed in the character input box.
Note
The characters having been input in the input
box will be overwritten and replaced with the
message.
Continued
37 GB