Tally Dascom DP-230L Manual page 47

Problem Possible Cause
stable,Or print all the Use the media with sliding
content together. layer.
The lid of the paper bin is not
closed.
Emulation language or data
The printout is garbled.
code system is not correct.
Low voltage
The printer accepted the Media has not been properly
print data, but did not loaded.
print it.
Emulation language or data
code system is not correct.
The printer cannot be The interface setting is not
printed through an correct.
optional interface.
31
Solution
Reduce maximum print speed
Cover the paper bin cover.
Setup the correct emulation
language and data code system.
Please check and charge.
Properly load media.
Setup the correct emulation
language and data code system.
Print the self-test page and correct
the interface setting.