Coffee System Use; Settings - Jenn-Air W11325607A Use & Care Manual

You can control several settings through the Settings Menu:
Rinsing, Beep, Statistics, Cup Warmer, Water Hardness, Auto-Off,
Coffee Temperature, Descaling, Auto-Start, Set Language, Set
Time, Cup Lighting, Drink Settings, Energy Saving, Background,
Demo Mode and Default Values.
To access the Settings Menu, press MENU. To exit the Settings
Menu, press ESC.
Rinsing
Use this function to rinse the coffee spouts and preheat the
brewing unit. Place a container with a minimum capacity of
1/2 cup (100 mL) under the coffee and hot water spouts.
1. Press
to enter the menu.
2. Press or until the display shows
3. Press to start rinsing.
4. After a few seconds, hot water will come out of the coffee
spout and RINSING HOT WATER RUNNING will be displayed.
5. To stop the rinsing cycle, press
stop automatically.
IMPORTANT: Do not leave the coffee system unattended while
hot water is being delivered.
NOTES:
If the coffee system is not used for more than 3-4 days, we
■
strongly recommend doing 2-3 rinse cycles before use.
After rinsing, it is normal for some water to remain in the
■
grounds container.
04-Mar-2019 07:49:57 EST | RELEASED

COFFEE SYSTEM USE

B
A
MY
K
User 2
J
I Espresso
A. Menu to customize beverages settings
B. Appliance settings menu
C. Selected strength
D. Clock
E. Selected size
F. Strength selection
RINSING.
STOP or wait for rinsing to
In some European factories the letter "W" of the part code mentioned herein will be automatically
C D E
00:00
MY
MY
Co ee Cappuccino
G. Size selection
H. Right scroll arrow
I. Selectable drinks (press on the scrolling
arrows to see all the drinks)
J. Left scroll arrow
K. Customizable profiles (see "Memorizing
Your Personal Profile")

Settings

Beep
This function will enable or disable tones that sound when an icon
is pressed or an accessory is inserted/removed.
1. Press to enter the menu.
2. Press
or
3. Press to enable
notification. Press
Statistics
This function displays statistical data relating to the coffee
system.
1. Press to enter the menu.
2. Press
or
3. Press . It is possible to check all the available statistics by
pressing
Cup Warmer
Use to warm cups before making coffee.
1. Press to enter the menu.
2. Press or
3. Press
to active
warmer.
4. Press
ESC
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
F G
Strength
Size
H
Latte
macchiato
until the display shows
or disable
to return to the home page.
ESC
until the display shows
or . Press to return to the home page.
ESC
until the display shows
or deactivate
to return to the home page.
BEEP.
the sound
STATISTICS.
CUP WARMER.
the cup
7