Humidity Sensor; Step Motor - Samsung AC026RN1DKG Service Manual

Disassembly and Reassembly
No Parts
4 Humidity
Sensor
5

Step motor

3-58
Procedure
3) Disconect the conector wire from the
PBA.
1) Remove the humidity sensor from the
panel.
1) Unscrew 2 screws on cover motor.
(Use +Screw Driver
2) Remove 2 cover motor.
3) Remove the 2 fixed screws and
disassemble the step motor.
(Use +Screw Driver)
Remark
Samsung Electronics