Torch - Linak Homeline HC40 Advanced Series User Manual
Hide thumbs
Also See for Homeline HC40 Advanced Series:
- User manual (40 pages) ,
- User manual (43 pages)
Table of Contents
Advertisement
Torch
On the backside of the hand control is a torch.
Turning the torch on/off
1. Highlight the "TORCH" bar in the "MY BED" menu.
2. Press the 'select' button to enable the torch.
3. The first five times a tip on how to turn on/off the torch by shaking the hand control shows. Press the 'select' button or
button 3 "OK". The icon changes to green and torch is now on.
The torch can also be turned on directly from any screen. Simply shake the hand control sideways twice. To turn it off, simply
shake the hand control twice again.
Page 34 of 40
Advertisement
Table of Contents
Need help?
Do you have a question about the Homeline HC40 Advanced Series and is the answer not in the manual?
Questions and answers
the remote fell to the floor, put in new batteries, but this is theonly screen I get. Now I have no bed to sleep in tonight, 76 yrs old with cardiac and back issues - please help soon
If your Linak Homeline HC40 Advanced Series remote is not functioning after replacing the batteries, ensure the following:
1. Check that the batteries are inserted correctly as indicated in the battery housing.
2. Use alkaline AAA batteries, as other types may cause unintended restarts.
3. Ensure the battery lid is properly reattached.
4. If the remote is still not working, it may need to be paired again with the actuator system. Follow the pairing instructions.
5. If the issue persists, contact an authorized LINAK service center for further assistance.
This answer is automatically generated