Alarms - Linak Homeline HC40 Advanced Series User Manual
Hide thumbs
Also See for Homeline HC40 Advanced Series:
- User manual (40 pages) ,
- User manual (43 pages)
Table of Contents
Advertisement
Alarms
The alarm menu is accessible for systems including massage. When the alarm goes off, the massage motors start, providing a
soundless wake-up.
Highlight the "ALARMS" bar in the "MY BED" menu and press the 'select' button to access the alarm menu, which contains
three alarms.
1. Press the 'select' button to enable the alarm. The icon changes to green.
2. Press button 2 "EDIT" to change the alarm.
3. To disable an alarm, simply highlight the alarm and press the 'select' button. The icon changes to white/grey.
When the alarm goes off, the massage motors start in the latest used mode and
the HC40 screen shows a bell.
a. Press button 1 "SNOOZE" to snooze the alarm for 9 minutes.
b. Press button 3 "STOP" to stop the alarm.
When the alarm is stopped, it is disabled, and the user has to go to the alarm
menu to enable the alarm again for the next wake-up.
Page 28 of 40
Advertisement
Table of Contents
Need help?
Do you have a question about the Homeline HC40 Advanced Series and is the answer not in the manual?
Questions and answers
the remote fell to the floor, put in new batteries, but this is theonly screen I get. Now I have no bed to sleep in tonight, 76 yrs old with cardiac and back issues - please help soon
If your Linak Homeline HC40 Advanced Series remote is not functioning after replacing the batteries, ensure the following:
1. Check that the batteries are inserted correctly as indicated in the battery housing.
2. Use alkaline AAA batteries, as other types may cause unintended restarts.
3. Ensure the battery lid is properly reattached.
4. If the remote is still not working, it may need to be paired again with the actuator system. Follow the pairing instructions.
5. If the issue persists, contact an authorized LINAK service center for further assistance.
This answer is automatically generated