Batteries And How To Change For The Hc40 Twist; Tm Advanced - Linak Homeline HC40 Advanced Series User Manual
Hide thumbs
Also See for Homeline HC40 Advanced Series:
- User manual (40 pages) ,
- User manual (43 pages)
Table of Contents
Advertisement
Batteries and how to change for the HC40 TWIST
The hand control needs 2 x AAA batteries.
1. Open the battery lid on the front of the HC40, by pressing and sliding it in the opposite direction of the keypad.
2. Put in the new batteries as indicated in the housing.
We recommend to use alkaline batteries. Using another type of batteries can lead to unintended restart of the hand
control.
3. Reattach the battery lid by placing it back on the hand control and then slide it on in the direction towards the keypad.
Advanced
TM
Page 15 of 40
Advertisement
Table of Contents
Need help?
Do you have a question about the Homeline HC40 Advanced Series and is the answer not in the manual?
Questions and answers
the remote fell to the floor, put in new batteries, but this is theonly screen I get. Now I have no bed to sleep in tonight, 76 yrs old with cardiac and back issues - please help soon
If your Linak Homeline HC40 Advanced Series remote is not functioning after replacing the batteries, ensure the following:
1. Check that the batteries are inserted correctly as indicated in the battery housing.
2. Use alkaline AAA batteries, as other types may cause unintended restarts.
3. Ensure the battery lid is properly reattached.
4. If the remote is still not working, it may need to be paired again with the actuator system. Follow the pairing instructions.
5. If the issue persists, contact an authorized LINAK service center for further assistance.
This answer is automatically generated