Installation Stencil The ducting can pass through your wall Before beginning any installation work ensure alternatively if your kitchen has a soffit, the mains power has been turned off. Use the stencil provided to help position the then the ducting can be positioned to run hood onto the cupboard.
Page 5
Installation In Use Cleaning Re-Circulation using Carbon filters Control panel Regular cleaning will help to maintain the effectiveness of your Cooker Hood. Two carbon filters (not supplied) can also be added to your Cooker Hood, when air is to Switch off and unplug the Cooker Hood be re-circulated instead of external ducting.
Cleaning the filters Changing the panel To ensure the filters do not become a fire This cooker hood is originally fitted with stainless 4. Drill 6 holes (Ø3.5 x 6mm) on the back of the new hazard we recommend they are washed ever steel panel that for easier cleaning.
Maintenance and Troubleshooting Technical specifications Changing the internal light The Cooker hood is not working LTH645SWE Model Allow the Cooker hood to cool for at least • Check it is plugged in and switched on. Rated Voltage 30 minutes after use before changing the light bulb.
Page 8
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.
Page 9
Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0870 6001 338 (UK customers only) Calls charged at National Rate.
Need help?
Do you have a question about the LTH645SWE and is the answer not in the manual?
Questions and answers