Cleaning And Maintenance; Cleaning Bpm Connect; Recharging Bpm Connect; Factory Resetting Bpm Connect - Withings BPM Connect Installation And Operating Instructions Manual

Cleaning and maintenance

Cleaning BPM Connect

• Do not use an alcoholic-base or solvent agent to clean BPM Connect.
• Clean BPM Connect with a soft and dry cloth.
• The dirt on the cuff can be cleaned by a moisten cloth and soap.
• Do not flush BPM Connect and cuff with much water.
• Do not dismantle BPM Connect or disconnect the cuff or try to repair by
yourself. If any problem happens, refer to the distributor.
• Do not operate BPM Connect under severe environment of extreme
temperature or humidity, or direct sunshine.
• Do not shake BPM Connect violently.
• Do not submerge BPM Connect or any of the components in water.
• Do not let BPM Connect under strong shocks, such as dropping the device on
the floor.

Recharging BPM Connect

You can easily charge your BPM Connect using the charging cable provided with
the blood pressure monitor. To do so, connect the USB end of the charging cable
to a power source.

Factory resetting BPM Connect

Performing a factory reset allows you to delete all of the data stored on it.
Important:
• Factory resetting BPM Connect. will not remove any of the data that was
synced from the Health Mate app.
• All data that wasn't synced before resetting BPM Connect will be lost
permanently.
To do this, first dissociate BPM Connect from your Health Mate account. Please
refer to "Dissociating BPM Connect" on page 32
Then, 'forget' or 'unpair' BPM Connect. from your mobile device's list of Bluetooth
devices.
On iOS:
1. Go to Settings and select Bluetooth.
2. Select the i icon next to BPM Connect.
3. Select Forget Device to confirm.
BPM Connect
v1.0 | July 2019
for more information.
EN - 34