Table of Contents
Advertisement
4.
Loosen the knob to adjust the device into the correct
position. Then tighten the knob to make sure the
device securely locked.
5. Connect the 12V DC connector of the OBD cable
to the DC Input port of the device.
6. Plug the OBD cable into your vehicle's OBD socket.
A
Attention:
1. In most cars, the OBD port is located in area A, B, C, D
or E.
2. The OBD cable should not hang unsafely or extrude
over 10mm from the car cabin.
3. The mounting of the device and the OBD cable should
NOT interfere with the normal operation of vehicle's
original equipment, such as the airbag, etc.
26
B
C
1
8
9
16
D
D
E
1
8
9
16
Advertisement
Table of Contents
