8. Micro USB Port 16. Speaker User manual English Driving Recorder ADR900 Cable Clip & Bracket x 1 OBD Cable x 1 Sticky tape x 5 User manual x 1 Attention: 1. This device is equipped with an OBD power adapter.
Quick Start 2.1 Insert the Memory Card 1. Insert the memory card with the gold contacts facing to the front of the device. 2. Push the memory card until it clicks into place, and slide the switch to ON. 2.2 Install in Vehicle Peel off the protective plastic film from both the bracket and Lens.
2. Please make necessary attempts to find a pasting position where the portion of windscreen in front of device’s lens can be cleaned automatically by the vehicle windscreen wiper, and the status indicator of device can be easily captured by the eyes of the driver. Please do clean the pasting surface of glasses beforehand.
5. Connect the micro USB port of OBD cable to the Micro USB port of the device. 6. Plug the OBD cable to the OBD socket of your vehicle. 7. Paste the DC converter box of OBD cable near the device. Attention: 1.
2.5 Manual Voice Recording Off/On 1. When the setting of voice recording in System Setting is OFF, press ▼ to switch on voice recording. 2. When the setting of voice recording in System Setting is ON, press ▼ to switch off voice recording. 2.6 Remove the Memory Card Slide the switch to Off, and push to eject the memory card out of the slot.
Notes: 1. If vehicle is not be used over a month, please do disconnect OBD cable to avoid the possible over power consumption of vehicle battery. 2. Please use the dedicated OBD cable to avoid noncompliance with the device. 3. Once connected to a PC through USB, the device only allows data transferring.
User Interface Description Emergency recording status indicator Voice recording ON/OFF indicator WDR(Wide dynamic range) ON/OFF indicator Video resolution indicator Video recording/stop status indicator Driver fatigue alert icon Driver fatigue index ISO value Date & Time stamp Status indicator - Blue: Video Recording status - Red: Emergency recording status (when the EasyCapture button is pressed) - Off: Non-recording status...
System Setting Press OK to show the main menu, and set different functions of the device. 4.1 Set Date and Time 1. Press OK to open the main menu. 2. Press ▲/▼ to select Date&Time icon and press OK to enter date and time setting Menu.
Select the sensitivity level of collision detection to Collision Detection high / middle /low /off. Date/Time Set date and time for the device LCD Auto Set the time before the LCD is turned off automatically, or set the LCD always on. Format your Micro SD Card.
Operating Instruction 5.1 Recording Videos 5.1.1 Normal Video Recording When the engine of the vehicle is on, the device automatically turns on and starts recording continuously. When the engine of the vehicle is off (parking status), video recording will stop automatically.
5.2 Playback Videos 1. Press OK to enter the main Menu. 2. Press ▲/▼ to select Video icon and press OK. 3. Press ▲/▼ to select Normal or Emergency Video folder and press OK. 4. Press ▲/▼ to find the desired video file and press OK, and then select Play to play it.
2. Select Delete All to delete all unlocked video files. 3. A confirmation message appears on the screen, press ▲/▼ to select YES and press OK to confirm deletion. 5.4 Protecting Videos To secure videos against being overwritten, 1. Press ▲/▼ to find the desired video file and press OK.
Add-on Functions 6.1 WaveGuard Parking Monitoring ® To protect your vehicle continuously during parking status, the device will start recording and save to Normal video folder whenever it detects moving objects. And video recording function will be shutdown automatically to conserve vehicle battery power when there is no moving objects detected.
Technical Specification WaveGuard parking surveillance ® Automatic video recording Collision detection & emergency file protection Seamless loop recording Auto exposure Auto white balance Functions Date and time stamp Auto LCD off Driver fatigue alert and fatigue index display EasyCapture emergency recording button Wide angle video capturing Advanced night view Image Sensor...
Disclaimer * The device is only suitable for the 12V power supply's vehicles. * To realize 7 days x 24 hours’ protection by video surveillance, the SD card capacity must be at least 32G. * The device only can detect and record moving objects within a limited range, and in the same direction with lens coverage, but can't detect any events in reversed direction.