Advertisement

Quick Links

Size:75(w)x127.5(h)mm
User manual
English
GoSure
ADR900s

Advertisement

Table of Contents
loading

Summary of Contents for Philips GoSure ADR900s

  • Page 1 Size:75(w)x127.5(h)mm User manual English GoSure ADR900s...
  • Page 2 微波眼全天停车监控功能.......
  • Page 3 6. 微波眼停车监控指示灯 12. DC 9. Micro USB 1 5. 16. DC...
  • Page 4 User manual English GoSure ADR900s...
  • Page 5 面 然后上推 滑动开关。 1.撕去支架背面的塑料保护膜。...
  • Page 6 18~38°C...
  • Page 7 12V DC输出插头插接到记录仪DC输入...
  • Page 8 打开滑动开关,...
  • Page 9 ( 720P/30FPS ) (720P/60FPS) (1080P/30FPS) • • • •...
  • Page 10 录像时间 • • 紧急按钮...
  • Page 11 "OK" 日期时间 "OK" 日期时间 "OK" 入日期/时间设置菜单。 "OK" 1. 设置停车监控时的分辨率。 2. 打开/关闭停车监控。 3. 打开/关闭 WaveGuard 指示灯。...
  • Page 12 屏幕设置...
  • Page 13 会 WaveGuard...
  • Page 14 媒体文件 "OK" "OK" 媒体文件 "OK " 一般录像 "OK" 视频文件 "OK" 删除 "OK"...
  • Page 15 "OK" "OK" "OK"...
  • Page 16 微波眼功能(全天停车监控) 地...
  • Page 17 微波眼全天停车监控 星光级夜视系统 2.7英寸液晶显示屏(960x240) 七 64M x 16bit (1 Gbits ) DDR3 SDRAM 64Mb SPI 32GB Class10 64GB) -10°C 60°C -20°C 7 0°C Micro USB2.0接口,12V DC接口, 106.2 x 50.0 x 31.8毫米...
  • Page 18 * 该记录仪仅适用于12伏电源供电的汽车,请使用原装 OBD供电接口,Micro USB接口仅用于数据传输。 控 70 ° C 控 微波眼的监测范围。若通过调节系统设置 仍然无法满足您对汽车录像保护范围的要求,请将其更换 为质量更好的汽车贴膜,或在汽车贴膜上“开”一个小 窗。判断车膜是否影响微波眼功能:站在车头挥手,红灯 闪烁,则没问题。 在完全无光线或者照度极低的条件下,本产品无法拍摄清 晰影像。...
  • Page 19 • • • • • 8008-201-201 4009-201-201...
  • Page 20 GB/T 26572 GB/T 26572...
  • Page 21: Table Of Contents

    Table of Contents 1 Product Overview ..............22 2 Quick Start ................24 2.1 Inserting the Micro SD Card ......24 2.2 Installing in a Vehicle ..........24 ........27 ..... 27 2.5 Removing the Micro SD Card ......27 2.6 About the Micro SD Card ........27 3 User Interface..............29 4 System Settings ..............
  • Page 22: Product Overview

    Product Overview 1. Bracket Holder 4. Slide Switch 2. Micro SD card Slot 5. Speaker 3. Lens 6. WaveGuard Indicator 7 . Up Button 12. DC Input Port 8. Return/EasyCaptrue 13. Down Button/Voice Button Recording ON/OFF 9. Micro USB Port 14.
  • Page 23 User manual English GoSure ADR900s Bracket x 1 User manual x 1 OBD Cable x 1 Attention: 1. This device is equipped with an OBD power adapter. The OBD is the car's On-Board Diagnostics interface and can provide a constant power supply to the device.
  • Page 24: Quick Start

    Quick Start 2.1 Inserting the Micro SD Card 1. Insert the Micro SD card with the gold contacts outward, toward the front of the device. 2. Push the Micro SD card until it clicks into place, and slide the switch to ON. 2.2 Installing in a Vehicle 1.
  • Page 25 portion of windscreen in front of the device's lens will be cleaned automatically by the vehicle's windshield wiper, and the device's status indicator can be easily perceived by the driver's eyes. Please clean the pasting surface of the glass beforehand. Attention: 1.
  • Page 26 Loosen the knob to adjust the device into the correct position. Then tighten the knob to make sure the device securely locked. 5. Connect the 12V DC connector of the OBD cable to the DC Input port of the device. 6.
  • Page 27: Removing The Micro Sd Card

    1. Once the power of the vehicle is on, the device automatically turns on. 2.4 Manual Voice 1. When the voice recording setting in System Setting is OFF, press to switch on voice recording. 2. When the voice recording setting in System Setting is ON, press voice recording.
  • Page 28 Video Resolution Micro SD Card Capacity (720p/30 FPS) (720p/60 FPS) (1080p/30 FPS) 32 GB 520 minutes 340 minutes 320 minutes 64 GB 1040 minutes 680 minutes 640 minutes Notes: 1. If the vehicle is not used for over a month, please disconnect the OBD cable to avoid potential excessive consumption of vehicle battery power.
  • Page 29: User Interface

    User Interface Description Video recording/stop status indicator Video resolution indicator WDR (Wide dynamic range) ON/OFF indicator Voice recording ON/OFF indicator Emergency recording status indicator Recording time Driver fatigue index ISO value Date and time stamp Status indicator - Blue: Video recording status Emergency button...
  • Page 30: System Settings

    System Settings Press "OK" functions of the device. 4.1 Set Date and Time Date/Time 1. Press "OK" to open the main menu. Date/Time 2. Use to select the Date/ Time icon and press "OK" to enter the Date/Time settings menu. 3.
  • Page 31: Setting Date And Time

    Select the sensitivity level of collision detection to Collision Detection Date/Time Set date and time for the device Setting or set the LCD to always on/o . Format Format your Micro SD Card. Language Chinese and English are available for selection. Voice Recording 10 EV Value...
  • Page 32: Operating Instructions

    Operating Instructions 5.1 Recording Videos 5.1.1 Normal Video Recording When the engine of the vehicle is on, the device automatically turns on and starts recording continuously. When the engine of the video recording will stop automatically. However, if any moving object at a reasonable range in front of the device is detected, the function will be activated immediately.
  • Page 33: Video Playback

    Media Files 5.2 Video Pl ayback 1. Press "OK" to enter the main Menu. 2. Use to select the Media Files icon and press "OK" . Media Files 3. Use to select the Normal, Emergency Video, and then press "OK". 4.
  • Page 34: Locking Videos

    2. Select Delete All to delete all to select YES and press "OK" deletion. 5.4 Locking Videos To lock videos from being overwritten: 1. Use "OK". to select Lock and 2. Use press "OK". 3. You will be automatically returned to the video list, and the selected video will be locked.
  • Page 35: Add-On Functions

    Add-On Functions 6.1 WaveGuard Parking Monitoring To protect your vehicle continuously while in parked status, the device will start recording and save to the Normal video folder whenever it detects moving objects. The video recording function will be deactivated auto- matically to conserve vehicle battery power when there are no moving objects detected.
  • Page 36 WaveGuard parking surveillance Automatic video recording protection Seamless loop recording Auto exposure Functions Auto white balance Date and time stamp Driver fatigue alert and fatigue index display Emergency recording button Advanced night view Image Sensor 2.1 Megapixel CMOS Full HD (1920 x 1080p) @ 30 fps Video Resolution HD Premium (1280 x 720p) @ 60 fps HD Premium (1280 x 720p) @ 30 fps...
  • Page 37: Disclaimer

    Disclaimer * The device is only suitable for 12V power supply vehicles, please use the original OBD power cable. Micro USB port is only used for data transmission. * To achieve 24/7 protection with video surveillance, the memory card capacity must be at least 32 GB. * The device can only detect and record moving objects within a limited range, and in the direction that has lens coverage, but cannot detect any events in the reverse...
  • Page 38 in front of the vehicle and wave your hand, and the red Under no light and extremely low light environment, the device cannot take clear video.
  • Page 40 Lumileds is the warrantor of this product. Philips trademarks are used under license from Koninklijke Philips N.V. (2018). © Lumileds Holding B.V. 2018. All rights reserved 3211 008 23241...

Table of Contents