Contents 1 Safety 10 Product information 2 Your car driving recorder 11 Notice Introduction What's in the box Overview 3 Get started Insert the Micro SD card Install the driving recorder Connect power Power off the driving recorder manually Use for the first time Switch modes 4 Record videos Know the interface...
1 Safety • Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). Always bring your product to a professional to • Read and understand all instructions remove the built-in battery. before you use your apparatus. If damage is caused by failure to follow instructions, the warranty does not apply.
Suction bracket recorder c Car charger d Short user manual Congratulations on your purchase, and e Cushion welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Overview Introduction a b c With the car driving recorder, you can: •...
3 Get started c MIC • The integrated microphone d RESET • Press to restore all settings to factory default. Insert the Micro SD card • Press to power on the driving recorder. • Press and hold for 3 seconds to power Note off the driving recorder.
Connect the driving recorder with the Connect power suction bracket. Connect the car charger to • the DC IN socket of the driving recorder, and • the cigarette lighter socket of the car. » The driving recorder is powered on when the car ignition is on.
Set the interface language Mute the button beep Select a language for on-screen display. You can mute the button beep. In video recording mode or photo capture In video recording mode or photo capture mode, tap [Setting] to access the system mode, tap [Setting] to access the system menu.
4 Record videos j Tap to turn off the screen. k Tap to switch between the video recording mode and the photo capture mode. When the car ignition is on, the driving recorder is powered on and starts video recording automatically.
[High]/[Middle]/[Low]: Select a • Use the mobile detection sensitivity level. [Off]: Disable the Gyro-sensor. • In video recording mode or photo capture mode, tap [Setting] to access the system Tap [OK]. menu. to select [Mobile detection]. Mute the microphone Tap [OK]. In video recording mode or photo capture to select an option.
5 Capture photos Make settings Make the following settings as you want. To capture photos, switch to photo capture mode first. Set the photo resolution In video recording mode or photo capture Know the interface mode, tap [Setting] to access the system menu.
6 View videos and View photos photos Access the file list In video recording mode or photo capture mode, tap [Play]. » The list of videos and photos is displayed. to select a photo from the file list. View videos Tap [OK] to view the photo. To return to the file list, tap [Cancel].
7 Use an external 8 Reset the display driving recorder Connect the driving recorder to an external display, and then you can watch the real image Use the reset button on the external display. Press RESET with the tip of a ballpoint pen or toothpick.
9 Check the 10 Product firmware information version Note • Product information is subject to change without prior In video recording mode or photo capture notice. mode, tap [Setting] to access the system menu. Battery Rechargeable lithium to select [Version]. battery (Designed for the backup of last data only) Tap [OK].
11 Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
Commercial Company Ltd., and WOOX Innovations (Shanghai) Commercial Company Ltd., is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. CVR600_93_UM_Online_V1.0...