Basic Functions Of The; Source Switching; Volume Control; Tone Settings (Tone Menu) - T+A Cala D User Manual

Table of Contents

Advertisement

The basic functions of the , described in this chapter are always available, regardless of the selected source.
Balance
Treble
Bass
Tone Control
Loudness
Basic Functions of the 

Source switching

The source buttons are used to select the desired internal source (VHF radio,
Streaming Client) or an external source (A1 IN, A2 IN, D1 IN, D2 IN, D3 IN,
Bluetooth Receiver) for playback.
Once the  has switched to the internal sources they can be operated using
the remote control.
Please refer to the following chapters for details of operating the individual
source devices.

Volume control

The volume of the  can be adjusted in fine increments using the -  +
button. A brief press on one volume button increases or reduces the volume by
one increment. Holding one of the volume buttons pressed in causes the
volume to change continuously.
Continuous listening to programme material at very high volume can result in
permanent loss of hearing. You can avoid subsequent health problems by
avoiding continuous listening at high volume

Tone settings (Tone menu)

The  features a range of facilities for adjusting the sound to suit your
personal preferences, the system's location and your room acoustics. All sound
settings are grouped together in the tone control menu (TONE menu).
The tone control menu is called up using the  button.
The features of the tone control menu are explained in detail in the next section.
Adjustment range /
Options:
-75 ... 0 ... +75
-12 ... 0 ... +12
off / on
off / on
Explanations:
This menu point allows you to alter the balance
between the left and right loud-speakers in
order to compensate for an unfavourable
listening position.
These two menu points are used to alter the
treble and bass settings.
This menu point can be used to disable (by-
pass) the 's tone controls.
To switch off the tone controls, select the
"OFF" setting. When the tone controls are
switched off, any adjustments you made to the
following menu points "BASS" and "TREBLE"
have no effect.
The  features a volume-dependent tone
control (LOUDNESS) which compensates for
the frequency-dependent sensitivity of the
human ear, and therefore of human hearing, at
very low volume levels.
This set-up option is used to switch loudness
on or off.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents