Remote Control - T+A Cala D User Manual

6

Remote Control

The infrared receiver for the remote control handset is located left of the screen
area of the . There must be line of sight contact between the FM100 and the
screen.
The following tables show the remote control buttons and their function when
operating the machine.

Switches the machine on and off
(red)
Direct source select buttons. If the machine is switched off,
pressing one of these buttons turns it on and at the same time
selects the corresponding source device.

Selects the Streaming Client function of the  (Internet Radio,
access to music servers).

Selects the analogue A1 IN or the digital D1 IN input. Press the

button repeatedly until the desired input is displayed on the
screen.

Selects the analogue A2 IN or the digital D2 IN / D3 IN input.

Press the button repeatedly until the desired input is displayed on
the screen.

Selects the Radio function of the 


Selects the Bluetooth Receiver function

Direct alpha-numeric input, e.g. track number, quick station
select, radio station.

abc
The buttons  and  are also assigned special
...
characters.
 During the text input procedure you can use the  button
to toggle between numeric and alpha-numeric input, and
xyz
between capitals and lowercase letters.


Switches sound on and off (MUTING)
(yellow)
-  +
Reduces / increases volume (volume control rocker)
(yellow)
Brief press opens the tone control settings menu:

Balance / Treble / Bass / Subwoofer / Loudness / Sound field
The menu points are called up using the  / 
button, and can be altered using the  /  buttons.
For more information on the tone controls please see the
Chapter 'Tone settings'.

 can be controlled by the  App 'TA Control' too.
For further information please visit our homepage
www.ta-hifi.com/app