Display - T+A Cala D User Manual

All the functions of the  are operated using the FM100 remote control handset. Direct-access buttons are provided for
the essential functions such as source select and track select, whereas less frequently required functions are controlled
by means of menus which are called up using the  /  button.
Screen

4

All information relating to machine status, the current music track and list
navigation is displayed on the graphic screen of the . The display is
context-sensitive, and in part varies according to the capabilities and facilities of
the service to which you are currently listening.
The most important information is highlighted on the screen according to
context. Supplementary information is provided by symbols above and below
the main data. The symbols used are listed and explained in the table below.
The displays and symbols which appear on the screen vary according to the
currently active function (SCL, Disc, etc.) and the type of music currently being
played.
The basic areas of the screen:
 Display field (a) shows the currently active source.
 Display field (b) shows information relating to the piece of music being
played. The essential information is displayed enlarged in the main line.
 Display field (c) shows information relating to the device and playback.
 The bottom line (d) displays supplementary context-sensitive information (e.g.
bitrate, elapsed time, state of reception).

The  provides different screen displays for the Streaming Client and the
radio.

Large-format display:
Enlarged display of the most important information, clearly legible even from
a distance

Detail display:
Small-text display showing a large number of additional information points,
e.g. bit-rate etc.
A brief press on the –button on the remote control handset is used to
switch between the display modes.
Audio System
e.g.