Activate slumber
function
Change the slumber time
Turn off slumber
function
16
Slumber-function
The machine has a slumber function that switches it to standby after a
selectable time interval between 15 minutes and 12 hours. This selection can
be done in steps of 15 minutes.
While the is powered up keep the key of the remote control
pressed until the display shows the slumber time.
While the slumber function is active the slumber time can be modified in steps
of 15 minutes using the / -keys. Any change comes immediately
into effect.
While the slumber function is active it can be turned off by keeping the
key pressed until the displaying of the slumber time is not shown any longer on
the display. After switching the function off the device can be operated in the
usual way. Alternatively the slumber function is also ended when the is
switched off.
As long as the slumber function is active there is no other user operation
possible besides the slumber functions mentioned above and the changing of
the volume.