Table of Contents
Advertisement
Alarm function
- with automatic power-off
Switching the Timer off
Calling up and operating
the menu
14
Alarm Timer
The machine features an integral Timer module which is capable of switching
the on with a selectable source at a programmable time (alarm clock).
Selecting an alarm timer in the Alarm Timer menu switches the function on and
activates it. You can now switch the off. The will switch itself on at the
pre-set time for as long as the set time is displayed on the screen.
This function is only possible if the 'Comfort stand-by' mode has been selected.
If the Timer is active, the switches itself on at the programmed alarm time.
Once switched on, a bell symbol flashes on the screen.
The switches itself off automatically one hour after the alarm time, unless
the alarm function is disabled during this period.
The alarm function can be disabled by operating or switching off the device. If
the alarm function is disabled, the time display and bell disappears. If the timer
is disabled by operating the device it now does not switch itself off
automatically after an hour! If you wish to switch the machine off, you must do
so manually by pressing the button.
A long press on the button calls up the Alarm Timer menu, where the
timer can then be disabled.
A brief press on the button calls up the Alarm Timer menu even when
the machine is switched off.
Alarm Timer menu
A long press on the button calls up the menu.
When you open the menu, you will hear the currently set alarm source at the
currently set alarm volume.
The screen displays the following Select points:
Use the / to select a point in the menu.
If you wish to change a selected menu point, first press the button,
and then use the / buttons to alter the value.
To accept the setting once you have altered the value, press the button
again.
If you wish to quit without accepting an alteration you have made, press the
button at any time.
Press the button again to leave the menu.
Hide quick links:
Advertisement
Table of Contents
