T+A Cala D User Manual page 15

Menu point
Alarm select
Menu point
Set Alarm Time
Menu point
Set Alarm Source
Menu point
Set Alarm Vol.
Menu point
Time Mode
Menu point
Set Time
Menu point
Disp. Brightness (Stdby)
In this menu point you can select whether the machine is to be switched on
automatically, and using which alarm.
Manual alarm time setting for the currently active alarm. Any change you make
at this point takes place slowly at first; holding the button pressed in increases
the rate of change.
Selects the source which is to be switched on at the alarm time point.
If you select the menu point Radio, you can use the  /  buttons to
select a radio station from the Favourites list.

Waking to the radio:
Take care to set a station which can be received well.
You can set the alarm volume at this point. If you change the volume setting,
the system immediately accepts the displayed volume level, and the change in
volume is audible.
This menu point is used to determine how the internal clock is set.
RDS If you select the menu point RDS, you can select a radio station
from the Favourites list using the  /  buttons.
If you select the 'Any' setting, the time of day is read out
automatically from the RDS signal of the current selected
station, and adopted by the machine. This occurs at night, and
about three minutes after switching on.
If you have selected a station, the time of day is automatically
read out from the RDS signal at night. If the selected station is
the current listening source, then the time of day is adopted by
the machine when switched on.
This only works if high-quality RDS reception is available.
It is now impossible to set the wrong time of day manually!
Summer time The time of day can be set manually in the menu point 'Set
time'.
Winter time The time of day can be set manually in the menu point 'Set
time'.
Manual method of setting the internal clock to the correct time.
Any change you make at this point occurs slowly at first - holding the button
pressed in increases the rate of change.

Manual adjustment is only possible if you have set Summer or Winter in the
menu point 'Clock mode'.
At this point you can adjust the screen brightness in Stand-by mode to suit your
personal preference. The brightness setting becomes active immediately. The
'Off' setting can only be selected if no alarm time is active.
15