Table of Contents
Advertisement
3
Installation and adjustment
The instructions in this chapter are for the user and the specialist dealer.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility. A list of
Vermeiren facilities can be found on the last page.
L
WARNING
: Risk of unsafe settings - Use only the settings described in this manual.
L
WARNING
: Risk of tipping over - Variation allowed adjustments can still change the
stability of your scooter (tilt back or sideways).
3.1
Tools
To set up the scooter the following tools are needed:
Wrench set n° 13, 17
Allen keyset n° 6
3.2
Manner of delivery
The scooter shall be delivered with:
Frame with armrests, steering unit, rear and front wheels
Footplate
Seat + backrest
Batteries (2x), motor
Basket
Rear view mirrors (2x)
Parking brake
Battery charger
Accessories
Manual
3.3
Adjusting the steering unit
The steering unit can be adjusted in many different positions (stepless) to suit each driver. The tiller
angle (A) is adjustable between 0° (horizontal, without seat) and 80° (top position).
L
WARNING
: Risk of injury - Never adjust the angle while you are driving.
L
WARNING
: Risk of injury - Turn the scooter off before you adjust the angle of the
steering unit.
L
WARNING
: Risk of injury - Do not lean with your whole body on the steering unit.
1. Push the lever
downwards.
2. Adjust the steering unit in the desired position.
3. Release the lever
.
Page 19
Eris
2019-03
Advertisement
Table of Contents
