VEHICLE CONTROLS
How to Change a Setting
n
1. Press the SETTINGS button.
Be sure the power mode is ON and the vehicle is at a complete stop.
2. Rotate the ENTER knob to view categories.
3. Press the ENTER knob to select.
Setting the Clock
On vehicles with navigation, the time is automatically set using GPS signals.
On vehicles without navigation, use the following steps to adjust the time in
the clock display.
1. Press the SETTINGS button.
2. Rotate interface dial to select System
Settings, then press the interface dial.
3. Rotate the interface dial to select the
Clock tab.
4. Rotate the interface dial to select
Clock Adjustment, then press the
interface dial.
5. Rotate the interface dial to change the
hours, then press dial to set.
6. Rotate the interface dial to change the minutes, then press the dial to set.
46 |
AUDIO AND CONNECTIVITY
Learn how to operate the vehicle's audio system.
Basic Audio Operation
Connect audio devices and operate buttons and displays for the audio system.
You can operate the audio system from the buttons
panel, the remote controls on the steering wheel, or the icons on the On
™
Demand Multi-Use Display
.
USB Port
n
Install the iPod USB connector or the
USB flash drive to the USB port.
n
Accessory Power Socket
Open the socket cover to use power when the vehicle is on.
The accessory power socket can be used when the power mode is in
ACCESSORY or ON.
AUDIO AND CONNECTIVITY
*1
and switches on the
*1 - If equipped
| 47