Table of Contents
Advertisement
5450 Four-Port Router User's Guide
Physical Details
Familiarize yourself with the router before installing.
Front Panel LEDs
The front panel contains the following LEDs:
Power
Off
Green
Flashing
Red
On
DSL Port
Off
Ethernet
On
Off
Activity
Off
Flashing
Off
Internet
Green
Rear Panel
DSL Port
(RJ11)
Four 10/100
Ethernet Ports
Power Adapter
Port
Power is off.
Power is on.
Flash write in progress.
The Power LED briefly shows red
during power-up. This indicates that the
SpeedStream is conducting the POST
(Power-On Self Test) that is run each
time the SpeedStream is powered on.
Post error occurred if persistent.
DSL connection is active.
No active DSL connection.
One or more Ethernet LAN ports are
active.
No active Ethernet LAN port
connection.
No data being transmitted or received.
Data is being transmitted or received.
No power or bridge mode or no DSL
link.
DLS link is up + WAN interface + WAN
interface has IP address.
Connect the RJ11 DSL cable (looks like a telephone
cord) here to use your DSL connection through an
existing phone line.
Connect the RJ45 Ethernet cable here to connect
your computers, hubs, or switches to the router.
You can configure port #4 as either a LAN or WAN
port.
Connect the supplied power adapter provided with
the router here.
3
Introduction
Example Front Panel
Example Rear Panel
Hide quick links:
Advertisement
Table of Contents
