Product Overview; Operation; Controls - Exmark ARX440CKC24000 Operator's Manual

Operation

Product Overview

Figure 4
1. Platform
2. Park brake lever
3. Engine controls
g231324
4. Motion control levers
5. Fuel cap
Operation
Note: Determine the left and right sides of the
machine from the normal operating position.

Controls

Motion Control Levers
The motion control levers, located on each side of the
top console, control the forward and reverse motion
of the machine.
Moving the levers forward or backward turns
the wheel on the same side forward or reverse
respectively. Wheel speed is proportional to the
amount the lever is moved.
Important: The tines are rotating when the
motion control levers are moved out of the
neutral position.
1. LH Motion control lever
2. RH Motion control lever
3. Front reference bar
4. Front of unit
Choke Control
Located on the control console (black knob) (see
Figure 6).
The choke is used to aid in starting a cold engine.
Pulling the choke knob upward will put the choke
in the "ON" position and pushing the choke knob
downward, will put the choke in the "OFF" position.
16
Figure 5
5. Forward
6. Neutral
7. Reverse
8. Rear reference bar
g223330