Exmark ARX440CKC24000 Operator's Manual page 18

Operation
Figure 8
Hour Meter Display
1. LCD Indicators/Information screen
2. Hour display
3. LED status light
Hours are displayed when the key is off or when
the machine is running. Hours are not displayed
when the machine is aerating.
Note: The LCD indicator will appear in the park
brake setting when it meets the "safe to start"
mode (park brake engaged).
• The tine engagement display monitors and
displays the electronic tine depth setting.
Figure 9
Tine Engagement Display
1. LCD Indicators/Information screen
2. Tine depth status bar
3. Tine depth setting indicator
4. LED status light
There are two ways to activate the display.
1. Tap the multi-function switch either up or down
to display the tine engagement meter.
2. Step on the tine ground engagement foot switch.
A higher number on the status bar increases the
length of the aeration plug and a lower number
decreases it.
Note: If the plug length is not desired length, the
machine may need to be adjusted to accommodate
for the weight of the operator (refer to the Operator
g211730
Weight Adjustment Control section for more
information).
Note: Refer to the Hour Meter/Tine Engagement
User's Guide for detailed information explaining
the Operator interface allowing users to access
information, reset counters, modify system settings,
and troubleshoot the equipment.
LED Status Lights
Located on the right side of the hour meter/tine
engagement display.
The LED is multi-colored to indicate the system
status and is located on the right side of the panel.
• Solid Green — indicates normal operating
activity.
• Blinking Red — indicates a fault is active.
• Solid Red — indicates maintenance is required.
Note: Refer to the Hour Meter/Tine Engagement
User's Guide for more information.
Multi-Function Switch
Located to the left of the hour meter/tine engagement
display.
This switch allows the operator to:
g211731
• increase/decrease the depth of aeration plug.
• lock or unlock the tine depth setting.
• lock or unlock the Tine Ground Engagement
Foot Switch.
Fuel Shut-Off Lever
Located under the air cleaner on the front RH side.
The fuel shut-off lever is used to shut off the fuel
when the machine will not be used for a few days,
18