Print Out Results (Optional); Troubleshooting - PCE Health and Fitness PCE-MA Series Manual

5.4

Print out results (optional)

You can print out the measurement results by using the optional PCE-BP 1 printer. To do so, follow these
steps:
1. Make sure that the printer is set up properly and both devices are connected to each other.
2. During operation, press and hold the
3. After this, the options "L-C" (Chinese print-out) and "L-E" (English print-out) will appear in the
display. Use the arrow keys
confirm.
4. After this, numbers from 1 to 5 will appear in the display which represent the last 5
measurements (which are stored in the device). Select a measurement by using the arrow keys
and and press the
5. The data is now sent to the printer via the RS-232 interface.
Print-out:
6

Troubleshooting

Error message Error cause
-Err 1- Sample weight below 1 g
Temperature setting below +40
-Err 2-
°C
Measuring time setting below 30
-Err 3-
seconds.
-Err 4- Halogen lamp problem
Time setting for slow heat-up
-Err 5-
mode below 3 minutes
-Err 6- Temperature sensor broken
Manual
key until "PrInT" appears in the display.
and to select the desired option and press the
key to confirm.
Possible solution
Put more than 1 g of the sample on the scales
and start the measurement.
Restart the scales.
Restart the scales.
Please contact our technical support.
Restart the scales.
Please contact our technical support.
15
key to