Network Connections; Connecting The Unit To Your Home Network (Network Settings) - Sony NAC-SV10i Operating Instructions Manual

Network connections

Connecting the unit to your home network
(network settings)
This section explains how to connect the unit to your home network. You can connect the unit to the
network either through a wireless or a wired LAN. Check your connection method using the chart below.
For details on which connection method your wireless LAN router/access point supports, refer to the
operating manual of your wireless LAN router/access point.
Are you going to use the WPS*
to your home network?
Yes
Which connection method do you intend to
use, the WPS push button configuration
method or the WPS PIN code method?
Push button
configuration
method
Use the WPS push
button configuration
method (page 27).
1
* WPS (Wi-Fi Protected Setup) is a standard created by the Wi-Fi Alliance allowing you to setup a wireless
network easily and securely.
2
* You can use the manual setup method when you cannot find the desired access point using the access point scan
method.
What the unit can do when connected to a network
•
The unit can play audio content stored on the server (a computer, etc.) on your home network (page 35).
•
The unit can play music services via the Internet (page 41).
24 GB
Which connection do you want to use, wireless or wired, to connect the unit
to your home network?
Wireless
Do you have a wireless LAN router/
access point?
Yes
1
setting to connect the unit
No
PIN code
method
Use the WPS PIN Use the access
code method point scan method
(page 28). (page 25).
Wired
Do you have a router or a modem with
a router function?
No
You need a wireless LAN
router/access point.
Use the manual
2
*
setup method
(page 26).
Yes No
You need a
router.
Use the wired
connection
method (page 29).