Configuring Default Settings - Sony ROOMLINK PCNA-MR10 Quick Reference Manual

RoomLink User Guide

Configuring Default Settings

You can conveniently access certain RoomLink features and functions by
customizing the default settings for your network media receiver and VAIO®
computer.
Connecting to a server automatically
You can set RoomLink to automatically connect to a VAIO® computer (server),
when accessing the TV, Video, Music, or Photo content. These steps establish a
specific VAIO computer as the default server for the TV, Video, Music, and
Photo features available through the network media receiver. Repeat these steps
for each feature.
1 Turn on your VAIO computer by pressing the power button, located on the
front panel.
2 If applicable, turn on the router using the power button or switch.
3 Turn on your TV by pressing the Power button in the TV control section of
the Remote Commander® unit.
4 Switch the input connection to the network media receiver by pressing the
TV/VIDEO button on the Remote Commander.
5 Turn on the network media receiver by pressing the POWER button on the
Remote Commander.
✍
When the Standby indicator light is red (dimmed), RoomLink™ is ready to be turned
on. The Standby indicator takes approximately 20 seconds to light after the AC power
cord is plugged into a wall outlet.
The network media receiver's Power/Rec indicator lights and the Main
Menu screen appears on your TV.
6 Use buttons on the Remote Commander to select a feature, such as TV -
/
Watch and record TV programs. Press SELECT.
The Select a server screen appears, listing the names of the available
servers.
✍
If the status of a server is shown as
the press the SELECT button on the Remote Commander.
58
Default Settings
, try selecting Connect from the submenu,