Sony ROOMLINK PCNA-MR10 Quick Reference Manual page 69

3 Press the up or down arrow buttons to highlight System Settings, then press
the SELECT button.
The System Settings screen appears.
4 Press the up or down arrow buttons to highlight Factory Default, then press
the SELECT button.
The Default settings screen appears.
Default settings screen
5 Use to highlight OK, then press the SELECT button.
/ / /
All settings are reset to the original factory settings.
Registering RoomLink and your VAIO computer
RoomLink™ enables you to restrict access to your VAIO® computer, accepting
access from the network media receiver only.
To register the network media receiver
1 On the Remote Commander® unit, press the MAIN MENU button.
The Main Menu appears.
2 Highlight Settings, then press the SELECT button.
The Settings screen appears.
Settings
Default Settings
Reset to default factory settings as following:
- Startup Menu:
- IP Address:
- REC Mode:
- Live Mode:
- Video Server Confirmation:
- Slide Show Interval:
- Slide Show Repeat:
OK
:Return
:Select
Last function used
Auto obtain an IP address
Standard
Standard
No
5 sec
On
Cancel
Setting Up RoomLink
69