Sony ROOMLINK PCNA-MR10 Quick Reference Manual page 66
Roomlink network media receiver
Hide thumbs
Also See for ROOMLINK PCNA-MR10:
- Specifications (2 pages) ,
- Quick reference manual (2 pages) ,
- Manual (51 pages)
Table of Contents
Advertisement
RoomLink User Guide
4
Press the up or down arrow buttons to highlight IP Address, then press the
SELECT button.
The IP Address screen appears.
IP Address screen
5
Press the up or down arrow buttons to highlight Specify IP Address, then
press the SELECT button.
6
Use
to highlight the IP Address numbers, then press the SELECT
/
/ /
button.
7
Use the channel number buttons or the up/down arrow buttons to enter
numbers for the IP address and the subnet mask, then press the SELECT
button.
8
Use direction arrow buttons to highlight OK, then press the SELECT
button.
9
Turn the RoomLink™ unit off, then restart it, to enable the changes to take
effect.
✍
If you are not using a router device, select "Obtain the IP address automatically." An IP
address and subnet mask is generated automatically.
66
Settings
IP Address
Obtain an IP address automatically (using router)
Obtain an IP address automatically (not using router)
Specify an IP address
Current Settings:
IP Address:
Subnet Mask:
OK
:Select
:Return
000
.
000
.
000
.
000
000
.
000
.
000
.
000
CANCEL
Advertisement
Table of Contents
