Transmitter Settings; Configuring The Transmitting Channel Settings - Sony DWZ-B50I Operating Instructions Manual

Configuring the battery type
Specify the type of battery that is being used
in the transmitter so that the transmitter's
remaining battery charge can be displayed
properly on this unit. The factory default
setting is [Alkaline].
1
In the [Setup] screen, select [Advanced
Settings].
2
Select [Battery Type].
3
Select the battery type.
Alkaline: Alkaline dry cell batteries
are being used in the transmitter.
Ni-MH: Rechargeable nickel-metal
hydride batteries are being used in the
transmitter.
Lithium: Lithium batteries are being
used in the transmitter.
This completes the configuration, and
the main screen appears again.
Transmitter
Settings
Configuring the
Transmitting Channel
Settings
Two RF modes (channel modes), [Wide
Band] and [Narrow Band], are available on
the DWZ.
Each RF mode consists of six channels.
Select the appropriate channel according to
your intended use. The RF mode is set to
[Wide Band] and the transmission channel
is set to 1 under factory default settings.
RF mode Transmitting
channel
number
Wide Band 1/2/3/4/5/6
(WIDE)
Narrow a/b/c/d/e/f
Band
(NARROW)
Description
This mode
reduces any
interference
to other
wireless
equipment.
This mode
uses the
Clear
Channel
Scan
function,
making it
useful for
avoiding
any
interference
from other
wireless
equipment.

Transmitter Settings

17