Sony ROOMLINK PCNA-MR10 Quick Reference Manual page 42

RoomLink User Guide
ENVIRONMENT 7: Connecting multiple VAIO computers
(Under conditions similar to Environment 5 and 6)
Connecting in Environment 7
VAIO® Computer #1
MONITOR
USB
MIC HEADPHONES LINE IN
MONITOR
AUDIO S VIDEO/VIDEO AUDIO S VIDEO/VIDEO VHF/UHF
– VIDEO OUTPUT – – VIDEO1 INPUT –
PHONE LINE
VAIO® Computer #2
* For information on fixed IP addresses, see "Assigning a fixed IP address" on page 47.
42
WAN
To Ethernet port
Network cable
(sold separately)
To Ethernet port
Network cable
(sold separately)
Network switch* or
Router device with
a built-in network
LAN
switch**
(sold separately)
To Ethernet port
Network cable
with ferrite core†
(supplied)
*If connecting with a multiple
port network switch device
(sold separately), the VAIO
computer requires a fixed IP
address.
** Use a router device or a
multiple port network switch
device that is compatible with
100BASE-TX standard. A WAN
connection is not necessary.
† Attach the supplied ferrite
core to the supplied network
cable, before connecting the
cable to the network media
receiver.
Connections may vary,
depending on your network
environment. Contact your
Internet Service Provider for
connection information.
*
RoomLink™