Table of Contents
Advertisement
15
Enter an IP address and a sub-netmask.
Enter different IP addresses in your CLIÉ handheld and the other
communication device.
Enter the same Subnet mask in your CLIÉ handheld and the other
communication device.
(Eg.)
IP address
Subnet mask
Tip
Enter a gateway address if necessary. When it is necessary to enter a DNS
address, tap and tick the checkbox of [Auto] in [DNS Address] before
entering the DNS address.
16
Tap [OK].
The [Wireless LAN Setup] screen appears.
17
Tap [OK].
The settings are completed in the profile name you set in Step 7.
18
Tap the
The home screen appears.
28
CLIÉ handheld: 192.168.0.1
Other device: 192.168.0.2
CLIÉ handheld/other device:
255.255.255.0
Note
User has to find the Subnet mask from the
PC that he/she wants to connect to. The
following is referred to find Subnet mask on
a PC.
Windows 98 and Windows ME:
From [Start] c [Run...] c type in 'winipcfg' c
the [IP configuration] dialog box appears c
check the IP address and Subnet mask.
Windows 2000 and Windows XP:
From [Start] c [Run...] c type in 'cmd' c type
'ipconfig/all' c check the IP address and
Subnet mask.
Home icon on your CLIÉ handheld.
Advertisement
Table of Contents
